# iptables -I INPUT -p tcp --dport 9751:9760 -j ACCEPT -i eth0
~> telnet <skanner_ip-adr> 9751
Trying <skanner_ip-adr>...
telnet: connect to address <skanner_ip-adr>: Connection refused
xsane hpaio:/net/Photosmart_C7200_series?ip=<ip>
(...)
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
# Add support for the HP-specific backend. Needs net-print/hplip installed.
#hpaio
# This is the net backend config file.
## net backend options
# Timeout for the initial connection to saned. This will prevent the backend
# from blocking for several minutes trying to connect to an unresponsive
# saned host (network outage, host down, ...). Value in seconds.
# connect_timeout = 60
## saned hosts
# Each line names a host to attach to.
# If you list "localhost" then your backends can be accessed either
# directly or through the net backend. Going through the net backend
# may be necessary to access devices that need special privileges.
# localhost
localhost
127.0.0.1
ip #eller hostname på skanner dersom den ligg inne i dns.
net
(...)
hpaio
terjeh skrev:Du mener 'xsane <skanner_ip-adr>' ?
QtanJ skrev:I /etc/sane.d/dll.conf
.....klipp
Fjern kommentering for hpaio eller hpoj etter kva drivar du har installert. Dersom dette ikkje fungerer les vidare.
# enable the next line if you want to allow access through the network:
net
lexmark_nscan
Konfigurer fila /etc/sane.d/hpaio.conf eller /etc/sane.d/hpoj.conf og legg inn ip-adresse.
#----------------------------------------
# Lexmark MFP SANE configuration file
#----------------------------------------
#
#----------------------------------------
# Scanner:
# device
[scanner]
device /usr/lexscan/scanner
# ip-address
# The IP address / hostname associated with this scan job.
option ip-address 10.10.50.51
# Profile Information:
# user-name
# The user name associated with this scan job.
option user-name current
# profile-name
# The profile name associated with this scan job.
option profile-name Scan_01
# Image Settings:
# content-type
# Indicates the type of material to be scanned.
# Valid values are 0,1,2. Default value is 1.
#
# 0 Text
# 1 Text/Graphics
# 2 Photo
option content-type 1
# scan-resolution
# The resolution of the scan job in dots per inch.
# Valid values are 75,150,200,300,400,600. Default value is 150.
option scan-resolution 150
# mode
# The color depth of the scan job.
# Valid values are 0,1,2. Default value is 1.
#
# 0 1-bit Black & White
# 1 8-bit Grayscale
# 2 24-bit Color
option mode 1
# original-size
# The size of the area to be scanned.
# Valid values are 0 - 26. Default value is 0.
#
# 0 Letter 14 Business Card
# 1 Executive 15 Book Original
# 2 Legal 16 Auto Size
# 3 A3 17 Mixed Size
# 4 A4 18 Universal
# 5 A5 19 ID Card
# 6 A6 20 Oficio (México)
# 7 B4 21 Custom Scan Size 1
# 8 B5 22 Custom Scan Size 2
# 9 Tabloid 23 Custom Scan Size 3
# 10 Folio 24 Custom Scan Size 4
# 11 Statement 25 Custom Scan Size 5
# 12 3X5 Photo 26 Custom Scan Size 6
# 13 4X6 Photo
#
option original-size 0
# orientation
# The orientation of the original document text.
# Valid values are 0 and 1. Default value is 0.
#
# 0 Portrait
# 1 Landscape
option orientation 0
# scan-both-sides
# Scan both sides of the document.
# Valid values are 0 and 1. Default value is 0.
#
# 0 no
# 1 yes
option scan-both-sides 0
# source
# Indicates the number of pages to be scanned.
# Valid values are 0 and 1. Default value is 0.
#
# 0 Single Page
# 1 Multiple Pages
option scan-source 0
# Advanced Settings:
# brightness
# Adjusts the brightness setting for this scan.
# Valid values are 1 - 9. Default value is 5.
option brightness 5
# contrast
# Adjusts the contrast setting used for this scan.
# Valid values are 0 - 5. Default value is 0.
option contrast 0
# bkgremoval
# Increasing background removal will make more
# light shades equal white. Decreasing
# background removal will preserve more light
# shades. Valid values are -4 to 4. Default
# value is 0.
option bkgremoval 0
# mirrorimage
# Rotates scanned image horizontally.
# Valid values are 1 and 0. Default value is 0.
option mirrorimage 0
# colordropout
# Removes the selected color on the scanned
# image, then returns it in gray scale or
# black and white. Valid values are 0=None,
# 1=Red, 2=Green, 3=Blue. Default value is 0.
#
option colordropout 0
# colordropoutthreshold
# Works with color dropout, if color dropout
# is equal to none, this option is inactive.
# This will control the quality of color
# dropout. Valid values are 0 to 254. Defalut
# value is 128.
option colordropoutthreshold 128
# negativeimage
# Inverts the pixel values. Valid values are
# 0 and 1. Default value is 0.
option negativeimage 0
# Text or GUI mode:
# text-mode
# Launch this program with text mode or no.
# Valid values are 0 and 1. Default value is 0.
option text-mode 0
# Temporary Directory:
# temp-directory
# Directory where the scanned images are stored temporarily.
option temp-directory /tmp/lexmark-scan-images
# System Network Interface:
# interface
# The interface associated with this scan job.
# This option is used to select the appropriate network interface,
# If you encounter one of the following situations.
#
# 1.You have multiple network cards and the wrong one is being selected.
# 2.You are receiving the interface selection dialog and you would
# like for the backend to automatically select the interface without
# being prompted.
# Example values are: eth0, eth1, wlan0.
option interface any
xsane option ip-address 10.10.50.51
Skriv inn ip eller hostname i /etc/sane.d/net.conf?
localhost
10.10.50.51
Finn ut om net er aktivert i /etc/sane.d/dll.conf.
Skanneren er kopla til nettverket og ikkje gjennom ein datamaskin?
Då er ikkje INPUT det eg tenkjer på først. Det er ingen vits i å konfigurera INPUT dersom du har -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT i reglane dine. Det kan jo hende du ikkje har det, men då skulle eg trudd du visste meir om brannmuren din. Dersom du blokkerer OUTPUT bør du aktivera OUTPUT til dei portane og/eller til den adressa.
Dersom dette ikkje fungerer kan eg ikkje svara på det utan vidare. Kanskje med meir informasjon.
Eg håpar dette er nyttige tips, men dersom eg skriv på feil erfaringsnivå vil eg beklaga dette.
Du har prøvd å testa at skannardelen for sane er aktivert i skrivaren? Dersom den tilfeldigvis er deaktivert så kan det vera problemet
terje@alfa:~/Desktop> ls -la /usr/lexscan/scanner
-r--r--r-- 1 root bin 0 2008-10-02 09:41 /usr/lexscan/scanner
terje@alfa:~/Desktop> file /usr/lexscan/scanner
/usr/lexscan/scanner: empty
terjejh skrev:
- Kode: Merk alt
xsane option ip-address 10.10.50.51
Da skjedde det tydeligvis noe riktig, for jeg fikk spørsmål om å laste ned sertifikat - slik jeg skulle. Men da jeg også fikk sterk advarsel om jeg kjørte xsane som root, avbrøt jeg her. Etter denne første gangen, kom jeg aldri så langt igjen, heller ikke etter at jeg la inn ip-adr. i .conf fila, verken som bruker eller root. Problemet var tilbake til det gamle med 'No devices available'.
terjejh skrev:Skriv inn ip eller hostname i /etc/sane.d/net.conf?
Denne hadde jeg heller ikke funnet, og la inn ip-adressen til skanneren
- Kode: Merk alt
localhost
10.10.50.51
terjejh skrev:Dersom dette ikkje fungerer kan eg ikkje svara på det utan vidare. Kanskje med meir informasjon.
Utover informasjonen ovenfor, har jeg også funnet at Lexmark-network-scan også installerer tre symlinker under
/usr/lib/sane
libsane-lexmark_nscan.so
libsane-lexmark_nscan.so.1.0.16
libsane-lexmark_nscan.so.1
som alle peker til
/usr/local/lexmark/unix_scan_drivers/lib/sane/libsane-lexmark_nscan.so.1.0.16Du har prøvd å testa at skannardelen for sane er aktivert i skrivaren? Dersom den tilfeldigvis er deaktivert så kan det vera problemet
Denne siste var jeg ikke helt med på. Kan du forklare/eksemplifisere dette nærmere?
QtanJ skrev:Du har prøvd sane-find-scanner og scanimage -L sant?
Dersom skrivaren/skannaren har webinterface så er skannardelen aktivert?
Det er ikkje noko banlist du har havna på då du ikkje aksepterte sertifikatet?
snmpwalk -Os -c public -v 1 <skriver_ip>
# snmpwalk -Os -c public -v 1 <skanner_ip-adr> | grep <skanner_ip-adr>
ipAdEntAddr.<skanner_ip-adr> = IpAddress: <skanner_ip-adr>
ipAdEntIfIndex.<skanner_ip-adr> = INTEGER: 2
ipAdEntNetMask.<skanner_ip-adr> = IpAddress: 255.255.255.0
ipAdEntBcastAddr.<skanner_ip-adr> = INTEGER: 1
sudo nmap -sUS <skriver_ip>
# snmpwalk -Os -c public -v 1 <skanner_ip-adr>
sysDescr.0 = STRING: Lexmark X940e version NC.NPS.N129 kernel 2.6.10 All-N-1
sysObjectID.0 = OID: enterprises.641.2.71106836
sysUpTimeInstance = Timeticks: (20746052) 2 days, 9:37:40.52
sysContact.0 = STRING:
sysName.0 = STRING: ET000400AA6782
sysLocation.0 = STRING:
sysServices.0 = INTEGER: 72
sysORLastChange.0 = Timeticks: (4) 0:00:00.04
sysORID.1 = OID: snmpMIB
sysORID.2 = OID: vacmBasicGroup
sysORID.3 = OID: snmpFrameworkMIBCompliance
sysORID.4 = OID: snmpMPDCompliance
sysORID.5 = OID: usmMIBCompliance
sysORID.6 = OID: ifMIB
sysORID.7 = OID: tcpMIB
sysORID.8 = OID: udpMIB
sysORID.9 = OID: ip
sysORDescr.1 = STRING: The MIB module for SNMPv2 entities
sysORDescr.2 = STRING: View-based Access Control Model for SNMP.
sysORDescr.3 = STRING: The SNMP Management Architecture MIB.
sysORDescr.4 = STRING: The MIB for Message Processing and Dispatching.
sysORDescr.5 = STRING: The management information definitions for the SNMP User-based Security Model.
sysORDescr.6 = STRING: The MIB module to describe generic objects for network interface sub-layers
sysORDescr.7 = STRING: The MIB module for managing TCP implementations
sysORDescr.8 = STRING: The MIB module for managing UDP implementations
sysORDescr.9 = STRING: The MIB module for managing IP and ICMP implementations
sysORUpTime.1 = Timeticks: (3) 0:00:00.03
sysORUpTime.2 = Timeticks: (3) 0:00:00.03
sysORUpTime.3 = Timeticks: (4) 0:00:00.04
sysORUpTime.4 = Timeticks: (4) 0:00:00.04
sysORUpTime.5 = Timeticks: (4) 0:00:00.04
sysORUpTime.6 = Timeticks: (4) 0:00:00.04
sysORUpTime.7 = Timeticks: (4) 0:00:00.04
sysORUpTime.8 = Timeticks: (4) 0:00:00.04
sysORUpTime.9 = Timeticks: (4) 0:00:00.04
ifNumber.0 = INTEGER: 3
ifIndex.1 = INTEGER: 1
ifIndex.2 = INTEGER: 2
ifIndex.3 = INTEGER: 3
ifDescr.1 = STRING: lo
ifDescr.2 = STRING: eth0
ifDescr.3 = STRING: sit0
ifType.1 = INTEGER: softwareLoopback(24)
ifType.2 = INTEGER: ethernetCsmacd(6)
ifType.3 = INTEGER: tunnel(131)
ifMtu.1 = INTEGER: 16436
ifMtu.2 = INTEGER: 1500
ifMtu.3 = INTEGER: 1480
ifSpeed.1 = Gauge32: 10000000
ifSpeed.2 = Gauge32: 10000000
ifSpeed.3 = Gauge32: 0
ifPhysAddress.1 = STRING:
ifPhysAddress.2 = STRING: 0:4:0:aa:67:82
ifPhysAddress.3 = STRING: 0:0:0:0:67:82
ifAdminStatus.1 = INTEGER: up(1)
ifAdminStatus.2 = INTEGER: up(1)
ifAdminStatus.3 = INTEGER: down(2)
ifOperStatus.1 = INTEGER: up(1)
ifOperStatus.2 = INTEGER: up(1)
ifOperStatus.3 = INTEGER: down(2)
ifLastChange.1 = Timeticks: (0) 0:00:00.00
ifLastChange.2 = Timeticks: (0) 0:00:00.00
ifLastChange.3 = Timeticks: (0) 0:00:00.00
ifInOctets.1 = Counter32: 68659
ifInOctets.2 = Counter32: 77703607
ifInOctets.3 = Counter32: 0
ifInUcastPkts.1 = Counter32: 326
ifInUcastPkts.2 = Counter32: 85635
ifInUcastPkts.3 = Counter32: 0
ifInDiscards.1 = Counter32: 0
ifInDiscards.2 = Counter32: 0
ifInDiscards.3 = Counter32: 0
ifInErrors.1 = Counter32: 0
ifInErrors.2 = Counter32: 15
ifInErrors.3 = Counter32: 0
ifInUnknownProtos.1 = Counter32: 0
ifInUnknownProtos.2 = Counter32: 0
ifInUnknownProtos.3 = Counter32: 0
ifOutOctets.1 = Counter32: 68659
ifOutOctets.2 = Counter32: 7519258
ifOutOctets.3 = Counter32: 0
ifOutUcastPkts.1 = Counter32: 326
ifOutUcastPkts.2 = Counter32: 33577
ifOutUcastPkts.3 = Counter32: 0
ifOutDiscards.1 = Counter32: 0
ifOutDiscards.2 = Counter32: 0
ifOutDiscards.3 = Counter32: 0
ifOutErrors.1 = Counter32: 0
ifOutErrors.2 = Counter32: 0
ifOutErrors.3 = Counter32: 0
ifOutQLen.1 = Gauge32: 0
ifOutQLen.2 = Gauge32: 0
ifOutQLen.3 = Gauge32: 0
ifSpecific.1 = OID: zeroDotZero
ifSpecific.2 = OID: zeroDotZero
ifSpecific.3 = OID: zeroDotZero
atIfIndex.2.1.10.10.50.32 = INTEGER: 2
atPhysAddress.2.1.10.10.50.32 = Hex-STRING: 00 13 72 A8 C3 79
atNetAddress.2.1.10.10.50.32 = Network Address: 0A:0A:32:20
ipForwarding.0 = INTEGER: notForwarding(2)
ipDefaultTTL.0 = INTEGER: 254
ipInReceives.0 = Counter32: 69663
ipInHdrErrors.0 = Counter32: 0
ipInAddrErrors.0 = Counter32: 0
ipForwDatagrams.0 = Counter32: 0
ipInUnknownProtos.0 = Counter32: 0
ipInDiscards.0 = Counter32: 0
ipInDelivers.0 = Counter32: 69645
ipOutRequests.0 = Counter32: 14703
ipOutDiscards.0 = Counter32: 0
ipOutNoRoutes.0 = Counter32: 0
ipReasmTimeout.0 = INTEGER: 0 seconds
ipReasmReqds.0 = Counter32: 0
ipReasmOKs.0 = Counter32: 0
ipReasmFails.0 = Counter32: 0
ipFragOKs.0 = Counter32: 0
ipFragFails.0 = Counter32: 0
ipFragCreates.0 = Counter32: 0
ipAdEntAddr.<skanner_ip-adr> = IpAddress: <skanner_ip-adr>
ipAdEntAddr.127.0.0.1 = IpAddress: 127.0.0.1
ipAdEntIfIndex.<skanner_ip-adr> = INTEGER: 2
ipAdEntIfIndex.127.0.0.1 = INTEGER: 1
ipAdEntNetMask.<skanner_ip-adr> = IpAddress: 255.255.255.0
ipAdEntNetMask.127.0.0.1 = IpAddress: 255.0.0.0
ipAdEntBcastAddr.<skanner_ip-adr> = INTEGER: 1
ipAdEntBcastAddr.127.0.0.1 = INTEGER: 0
ipRouteDest.0.0.0.0 = IpAddress: 0.0.0.0
ipRouteDest.10.10.50.0 = IpAddress: 10.10.50.0
ipRouteDest.127.0.0.0 = IpAddress: 127.0.0.0
ipRouteIfIndex.0.0.0.0 = INTEGER: 2
ipRouteIfIndex.10.10.50.0 = INTEGER: 2
ipRouteIfIndex.127.0.0.0 = INTEGER: 1
ipRouteMetric1.0.0.0.0 = INTEGER: 1
ipRouteMetric1.10.10.50.0 = INTEGER: 0
ipRouteMetric1.127.0.0.0 = INTEGER: 0
ipRouteMetric2.0.0.0.0 = INTEGER: -1
ipRouteMetric2.10.10.50.0 = INTEGER: -1
ipRouteMetric2.127.0.0.0 = INTEGER: -1
ipRouteMetric3.0.0.0.0 = INTEGER: -1
ipRouteMetric3.10.10.50.0 = INTEGER: -1
ipRouteMetric3.127.0.0.0 = INTEGER: -1
ipRouteMetric4.0.0.0.0 = INTEGER: -1
ipRouteMetric4.10.10.50.0 = INTEGER: -1
ipRouteMetric4.127.0.0.0 = INTEGER: -1
ipRouteNextHop.0.0.0.0 = IpAddress: 10.10.50.1
ipRouteNextHop.10.10.50.0 = IpAddress: 0.0.0.0
ipRouteNextHop.127.0.0.0 = IpAddress: 0.0.0.0
ipRouteType.0.0.0.0 = INTEGER: indirect(4)
ipRouteType.10.10.50.0 = INTEGER: direct(3)
ipRouteType.127.0.0.0 = INTEGER: direct(3)
ipRouteProto.0.0.0.0 = INTEGER: local(2)
ipRouteProto.10.10.50.0 = INTEGER: local(2)
ipRouteProto.127.0.0.0 = INTEGER: local(2)
ipRouteAge.0.0.0.0 = INTEGER: 0
ipRouteAge.10.10.50.0 = INTEGER: 0
ipRouteAge.127.0.0.0 = INTEGER: 0
ipRouteMask.0.0.0.0 = IpAddress: 0.0.0.0
ipRouteMask.10.10.50.0 = IpAddress: 255.255.255.0
ipRouteMask.127.0.0.0 = IpAddress: 255.0.0.0
ipRouteMetric5.0.0.0.0 = INTEGER: -1
ipRouteMetric5.10.10.50.0 = INTEGER: -1
ipRouteMetric5.127.0.0.0 = INTEGER: -1
ipRouteInfo.0.0.0.0 = OID: zeroDotZero
ipRouteInfo.10.10.50.0 = OID: zeroDotZero
ipRouteInfo.127.0.0.0 = OID: zeroDotZero
ipNetToMediaIfIndex.2.10.10.50.32 = INTEGER: 2
ipNetToMediaPhysAddress.2.10.10.50.32 = STRING: 0:13:72:a8:c3:79
ipNetToMediaNetAddress.2.10.10.50.32 = IpAddress: 10.10.50.32
ipNetToMediaType.2.10.10.50.32 = INTEGER: dynamic(3)
ipRoutingDiscards.0 = Counter32: 0
icmpInMsgs.0 = Counter32: 27
icmpInErrors.0 = Counter32: 0
icmpInDestUnreachs.0 = Counter32: 24
icmpInTimeExcds.0 = Counter32: 0
icmpInParmProbs.0 = Counter32: 0
icmpInSrcQuenchs.0 = Counter32: 0
icmpInRedirects.0 = Counter32: 0
icmpInEchos.0 = Counter32: 3
icmpInEchoReps.0 = Counter32: 0
icmpInTimestamps.0 = Counter32: 0
icmpInTimestampReps.0 = Counter32: 0
icmpInAddrMasks.0 = Counter32: 0
icmpInAddrMaskReps.0 = Counter32: 0
icmpOutMsgs.0 = Counter32: 1335
icmpOutErrors.0 = Counter32: 0
icmpOutDestUnreachs.0 = Counter32: 1332
icmpOutTimeExcds.0 = Counter32: 0
icmpOutParmProbs.0 = Counter32: 0
icmpOutSrcQuenchs.0 = Counter32: 0
icmpOutRedirects.0 = Counter32: 0
icmpOutEchos.0 = Counter32: 0
icmpOutEchoReps.0 = Counter32: 3
icmpOutTimestamps.0 = Counter32: 0
icmpOutTimestampReps.0 = Counter32: 0
icmpOutAddrMasks.0 = Counter32: 0
icmpOutAddrMaskReps.0 = Counter32: 0
tcpRtoAlgorithm.0 = INTEGER: other(1)
tcpRtoMin.0 = INTEGER: 200 milliseconds
tcpRtoMax.0 = INTEGER: 120000 milliseconds
tcpMaxConn.0 = INTEGER: -1
tcpActiveOpens.0 = Counter32: 12
tcpPassiveOpens.0 = Counter32: 200
tcpAttemptFails.0 = Counter32: 0
tcpEstabResets.0 = Counter32: 2
tcpCurrEstab.0 = Gauge32: 10
tcpInSegs.0 = Counter32: 54213
tcpOutSegs.0 = Counter32: 9795
tcpRetransSegs.0 = Counter32: 0
tcpConnState.127.0.0.1.6101.0.0.0.0.0 = INTEGER: listen(2)
tcpConnState.127.0.0.1.6101.127.0.0.1.10241 = INTEGER: established(5)
tcpConnState.127.0.0.1.6101.127.0.0.1.10247 = INTEGER: established(5)
tcpConnState.127.0.0.1.7477.0.0.0.0.0 = INTEGER: listen(2)
tcpConnState.127.0.0.1.7477.127.0.0.1.10246 = INTEGER: established(5)
tcpConnState.127.0.0.1.8080.0.0.0.0.0 = INTEGER: listen(2)
tcpConnState.127.0.0.1.10241.127.0.0.1.6101 = INTEGER: established(5)
tcpConnState.127.0.0.1.10243.127.0.0.1.5000 = INTEGER: established(5)
tcpConnState.127.0.0.1.10245.127.0.0.1.48879 = INTEGER: established(5)
tcpConnState.127.0.0.1.10246.127.0.0.1.7477 = INTEGER: established(5)
tcpConnState.127.0.0.1.10247.127.0.0.1.6101 = INTEGER: established(5)
tcpConnState.127.0.0.1.10631.0.0.0.0.0 = INTEGER: listen(2)
tcpConnState.127.0.0.1.48879.127.0.0.1.10245 = INTEGER: established(5)
tcpConnLocalAddress.127.0.0.1.6101.0.0.0.0.0 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.6101.127.0.0.1.10241 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.6101.127.0.0.1.10247 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.7477.0.0.0.0.0 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.7477.127.0.0.1.10246 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.8080.0.0.0.0.0 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.10241.127.0.0.1.6101 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.10243.127.0.0.1.5000 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.10245.127.0.0.1.48879 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.10246.127.0.0.1.7477 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.10247.127.0.0.1.6101 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.10631.0.0.0.0.0 = IpAddress: 127.0.0.1
tcpConnLocalAddress.127.0.0.1.48879.127.0.0.1.10245 = IpAddress: 127.0.0.1
tcpConnLocalPort.127.0.0.1.6101.0.0.0.0.0 = INTEGER: 6101
tcpConnLocalPort.127.0.0.1.6101.127.0.0.1.10241 = INTEGER: 6101
tcpConnLocalPort.127.0.0.1.6101.127.0.0.1.10247 = INTEGER: 6101
tcpConnLocalPort.127.0.0.1.7477.0.0.0.0.0 = INTEGER: 7477
tcpConnLocalPort.127.0.0.1.7477.127.0.0.1.10246 = INTEGER: 7477
tcpConnLocalPort.127.0.0.1.8080.0.0.0.0.0 = INTEGER: 8080
tcpConnLocalPort.127.0.0.1.10241.127.0.0.1.6101 = INTEGER: 10241
tcpConnLocalPort.127.0.0.1.10243.127.0.0.1.5000 = INTEGER: 10243
tcpConnLocalPort.127.0.0.1.10245.127.0.0.1.48879 = INTEGER: 10245
tcpConnLocalPort.127.0.0.1.10246.127.0.0.1.7477 = INTEGER: 10246
tcpConnLocalPort.127.0.0.1.10247.127.0.0.1.6101 = INTEGER: 10247
tcpConnLocalPort.127.0.0.1.10631.0.0.0.0.0 = INTEGER: 10631
tcpConnLocalPort.127.0.0.1.48879.127.0.0.1.10245 = INTEGER: 48879
tcpConnRemAddress.127.0.0.1.6101.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnRemAddress.127.0.0.1.6101.127.0.0.1.10241 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.6101.127.0.0.1.10247 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.7477.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnRemAddress.127.0.0.1.7477.127.0.0.1.10246 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.8080.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnRemAddress.127.0.0.1.10241.127.0.0.1.6101 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.10243.127.0.0.1.5000 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.10245.127.0.0.1.48879 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.10246.127.0.0.1.7477 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.10247.127.0.0.1.6101 = IpAddress: 127.0.0.1
tcpConnRemAddress.127.0.0.1.10631.0.0.0.0.0 = IpAddress: 0.0.0.0
tcpConnRemAddress.127.0.0.1.48879.127.0.0.1.10245 = IpAddress: 127.0.0.1
tcpConnRemPort.127.0.0.1.6101.0.0.0.0.0 = INTEGER: 0
tcpConnRemPort.127.0.0.1.6101.127.0.0.1.10241 = INTEGER: 10241
tcpConnRemPort.127.0.0.1.6101.127.0.0.1.10247 = INTEGER: 10247
tcpConnRemPort.127.0.0.1.7477.0.0.0.0.0 = INTEGER: 0
tcpConnRemPort.127.0.0.1.7477.127.0.0.1.10246 = INTEGER: 10246
tcpConnRemPort.127.0.0.1.8080.0.0.0.0.0 = INTEGER: 0
tcpConnRemPort.127.0.0.1.10241.127.0.0.1.6101 = INTEGER: 6101
tcpConnRemPort.127.0.0.1.10243.127.0.0.1.5000 = INTEGER: 5000
tcpConnRemPort.127.0.0.1.10245.127.0.0.1.48879 = INTEGER: 48879
tcpConnRemPort.127.0.0.1.10246.127.0.0.1.7477 = INTEGER: 7477
tcpConnRemPort.127.0.0.1.10247.127.0.0.1.6101 = INTEGER: 6101
tcpConnRemPort.127.0.0.1.10631.0.0.0.0.0 = INTEGER: 0
tcpConnRemPort.127.0.0.1.48879.127.0.0.1.10245 = INTEGER: 10245
tcpInErrs.0 = Counter32: 0
tcpOutRsts.0 = Counter32: 1131
udpInDatagrams.0 = Counter32: 4057
udpNoPorts.0 = Counter32: 1332
udpInErrors.0 = Counter32: 0
udpOutDatagrams.0 = Counter32: 3884
udpLocalAddress.0.0.0.0.69 = IpAddress: 0.0.0.0
udpLocalAddress.0.0.0.0.5353 = IpAddress: 0.0.0.0
udpLocalAddress.0.0.0.0.6000 = IpAddress: 0.0.0.0
udpLocalAddress.0.0.0.0.10241 = IpAddress: 0.0.0.0
udpLocalAddress.224.0.1.22.427 = IpAddress: 224.0.1.22
udpLocalPort.0.0.0.0.69 = INTEGER: 69
udpLocalPort.0.0.0.0.5353 = INTEGER: 5353
udpLocalPort.0.0.0.0.6000 = INTEGER: 6000
udpLocalPort.0.0.0.0.10241 = INTEGER: 10241
udpLocalPort.224.0.1.22.427 = INTEGER: 427
snmpInPkts.0 = Counter32: 4006
snmpOutPkts.0 = Counter32: 3998
snmpInBadVersions.0 = Counter32: 0
snmpInBadCommunityNames.0 = Counter32: 0
snmpInBadCommunityUses.0 = Counter32: 0
snmpInASNParseErrs.0 = Counter32: 8
snmpInTooBigs.0 = Counter32: 0
snmpInNoSuchNames.0 = Counter32: 0
snmpInBadValues.0 = Counter32: 0
snmpInReadOnlys.0 = Counter32: 0
snmpInGenErrs.0 = Counter32: 0
snmpInTotalReqVars.0 = Counter32: 4008
snmpInTotalSetVars.0 = Counter32: 0
snmpInGetRequests.0 = Counter32: 0
snmpInGetNexts.0 = Counter32: 4012
snmpInSetRequests.0 = Counter32: 0
snmpInGetResponses.0 = Counter32: 0
snmpInTraps.0 = Counter32: 0
snmpOutTooBigs.0 = Counter32: 0
snmpOutNoSuchNames.0 = Counter32: 0
snmpOutBadValues.0 = Counter32: 0
snmpOutGenErrs.0 = Counter32: 0
snmpOutGetRequests.0 = Counter32: 0
snmpOutGetNexts.0 = Counter32: 0
snmpOutSetRequests.0 = Counter32: 0
snmpOutGetResponses.0 = Counter32: 4022
snmpOutTraps.0 = Counter32: 0
snmpEnableAuthenTraps.0 = INTEGER: enabled(1)
snmpSilentDrops.0 = Counter32: 0
snmpProxyDrops.0 = Counter32: 0
hrSystemUptime.0 = Timeticks: (20747119) 2 days, 9:37:51.19
hrSystemDate.0 = STRING:
hrSystemInitialLoadDevice.0 = INTEGER: 2
hrSystemInitialLoadParameters.0 = ""
hrSystemNumUsers.0 = Gauge32: 0
hrSystemProcesses.0 = Gauge32: 1
hrSystemMaxProcesses.0 = INTEGER: 1
hrMemorySize.0 = INTEGER: 524288 KBytes
hrStorageIndex.1 = INTEGER: 1
hrStorageIndex.2 = INTEGER: 2
hrStorageIndex.3 = INTEGER: 3
hrStorageIndex.4 = INTEGER: 4
hrStorageType.1 = OID: hrStorageRam
hrStorageType.2 = OID: hrStorageOther
hrStorageType.3 = OID: hrStorageOther
hrStorageType.4 = OID: hrStorageFixedDisk
hrStorageDescr.1 = STRING: RAM
hrStorageDescr.2 = STRING: %rom%
hrStorageDescr.3 = STRING: NVRAM
hrStorageDescr.4 = STRING: %disk%
hrStorageAllocationUnits.1 = INTEGER: 1 Bytes
hrStorageAllocationUnits.2 = INTEGER: 1 Bytes
hrStorageAllocationUnits.3 = INTEGER: 1 Bytes
hrStorageAllocationUnits.4 = INTEGER: 512 Bytes
hrStorageSize.1 = INTEGER: 536870912
hrStorageSize.2 = INTEGER: 11389
hrStorageSize.3 = INTEGER: 16384
hrStorageSize.4 = INTEGER: 153845936
hrStorageUsed.1 = INTEGER: 340704880
hrStorageUsed.2 = INTEGER: 11389
hrStorageUsed.3 = INTEGER: 16384
hrStorageUsed.4 = INTEGER: 66008
hrStorageAllocationFailures.1 = Counter32: 0
hrStorageAllocationFailures.2 = Counter32: 2
hrStorageAllocationFailures.3 = Counter32: 0
hrStorageAllocationFailures.4 = Counter32: 2
hrDeviceIndex.1 = INTEGER: 1
hrDeviceIndex.2 = INTEGER: 2
hrDeviceIndex.3 = INTEGER: 3
hrDeviceIndex.4 = INTEGER: 4
hrDeviceIndex.5 = INTEGER: 5
hrDeviceIndex.6 = INTEGER: 6
hrDeviceType.1 = OID: hrDevicePrinter
hrDeviceType.2 = OID: hrDeviceNonVolatileMemory
hrDeviceType.3 = OID: hrDeviceProcessor
hrDeviceType.4 = OID: hrDeviceDiskStorage
hrDeviceType.5 = OID: hrDeviceSerialPort
hrDeviceType.6 = OID: hrDeviceNetwork
hrDeviceDescr.1 = STRING: Lexmark X940e 0236554 LC.BR.P051
hrDeviceDescr.2 = STRING: Nonvolatile RAM
hrDeviceDescr.3 = STRING: Freescale 7447 Rev A
hrDeviceDescr.4 = STRING: Disk LINUX (none)
hrDeviceDescr.5 = STRING: USB Interface
hrDeviceDescr.6 = STRING: Network Interface
hrDeviceID.1 = OID: zeroDotZero
hrDeviceID.2 = OID: zeroDotZero
hrDeviceID.3 = OID: zeroDotZero
hrDeviceID.4 = OID: zeroDotZero
hrDeviceID.5 = OID: zeroDotZero
hrDeviceID.6 = OID: enterprises.641.1
hrDeviceStatus.1 = INTEGER: running(2)
hrDeviceStatus.2 = INTEGER: running(2)
hrDeviceStatus.3 = INTEGER: running(2)
hrDeviceStatus.4 = INTEGER: running(2)
hrDeviceStatus.5 = INTEGER: running(2)
hrDeviceStatus.6 = INTEGER: running(2)
hrDeviceErrors.1 = Counter32: 0
hrDeviceErrors.2 = Counter32: 0
hrDeviceErrors.3 = Counter32: 0
hrDeviceErrors.4 = Counter32: 0
hrDeviceErrors.5 = Counter32: 0
hrDeviceErrors.6 = Counter32: 0
hrProcessorFrwID.3 = OID: zeroDotZero
hrProcessorLoad.3 = INTEGER: 0
hrNetworkIfIndex.6 = INTEGER: 1
hrPrinterStatus.1 = INTEGER: idle(3)
hrPrinterDetectedErrorState.1 = Hex-STRING: 00 00
hrDiskStorageAccess.4 = INTEGER: readWrite(1)
hrDiskStorageMedia.4 = INTEGER: hardDisk(3)
hrDiskStorageRemoveble.4 = INTEGER: false(2)
hrDiskStorageCapacity.4 = INTEGER: 76922968 KBytes
hrPartitionIndex.5.1 = INTEGER: 1
hrPartitionLabel.5.1 = STRING: "%disk%"
hrPartitionID.5.1 = STRING: "%disk%"
hrPartitionSize.5.1 = INTEGER: 76922968 KBytes
hrPartitionFSIndex.5.1 = INTEGER: 1
hrFSIndex.1 = INTEGER: 1
hrFSMountPoint.1 = STRING: "%disk%"
hrFSRemoteMountPoint.1 = ""
hrFSType.1 = OID: hrFSOther
hrFSAccess.1 = INTEGER: readWrite(1)
hrFSBootable.1 = INTEGER: false(2)
hrFSStorageIndex.1 = INTEGER: 4
hrFSLastFullBackupDate.1 = STRING:
hrFSLastPartialBackupDate.1 = STRING:
mib-2.43.5.1.1.1.1 = Counter32: 0
mib-2.43.5.1.1.2.1 = INTEGER: 1
mib-2.43.5.1.1.3.1 = INTEGER: 3
mib-2.43.5.1.1.4.1 = ""
mib-2.43.5.1.1.5.1 = ""
mib-2.43.5.1.1.6.1 = INTEGER: 1
mib-2.43.5.1.1.7.1 = INTEGER: 1
mib-2.43.5.1.1.8.1 = INTEGER: 1
mib-2.43.5.1.1.9.1 = INTEGER: 1
mib-2.43.5.1.1.10.1 = INTEGER: 7
mib-2.43.5.1.1.11.1 = INTEGER: 1
mib-2.43.5.1.1.12.1 = INTEGER: 1
mib-2.43.5.1.1.13.1 = INTEGER: 3
mib-2.43.5.1.1.16.1 = ""
mib-2.43.5.1.1.17.1 = STRING: "0236554-76-0"
mib-2.43.5.2.1.2.1.1 = INTEGER: 1
mib-2.43.5.2.1.2.2.1 = INTEGER: 1
mib-2.43.5.2.1.2.3.1 = INTEGER: 1
mib-2.43.5.2.1.2.4.1 = INTEGER: 1
mib-2.43.5.3.1.2.1.1 = INTEGER: 1
mib-2.43.6.1.1.2.1.1 = STRING: "Door A"
mib-2.43.6.1.1.2.1.2 = STRING: "Door B"
mib-2.43.6.1.1.2.1.3 = STRING: "Door C"
mib-2.43.6.1.1.2.1.4 = STRING: "Door D"
mib-2.43.6.1.1.2.1.5 = STRING: "Door E"
mib-2.43.6.1.1.2.1.6 = STRING: "Cover J"
mib-2.43.6.1.1.3.1.1 = INTEGER: 4
mib-2.43.6.1.1.3.1.2 = INTEGER: 4
mib-2.43.6.1.1.3.1.3 = INTEGER: 4
mib-2.43.6.1.1.3.1.4 = INTEGER: 4
mib-2.43.6.1.1.3.1.5 = INTEGER: 4
mib-2.43.6.1.1.3.1.6 = INTEGER: 4
mib-2.43.7.1.1.2.1.1 = STRING: "EN"
mib-2.43.7.1.1.2.1.2 = STRING: "FR"
mib-2.43.7.1.1.2.1.3 = STRING: "DE"
mib-2.43.7.1.1.2.1.4 = STRING: "IT"
mib-2.43.7.1.1.2.1.5 = STRING: "ES"
mib-2.43.7.1.1.2.1.6 = STRING: "DK"
mib-2.43.7.1.1.2.1.7 = STRING: "NO"
mib-2.43.7.1.1.2.1.8 = STRING: "NL"
mib-2.43.7.1.1.2.1.9 = STRING: "SE"
mib-2.43.7.1.1.2.1.10 = STRING: "FI"
mib-2.43.7.1.1.2.1.11 = STRING: "PT"
mib-2.43.7.1.1.2.1.12 = STRING: "JA"
mib-2.43.7.1.1.2.1.13 = STRING: "RU"
mib-2.43.7.1.1.2.1.14 = STRING: "CS"
mib-2.43.7.1.1.2.1.15 = STRING: "PL"
mib-2.43.7.1.1.2.1.16 = STRING: "HU"
mib-2.43.7.1.1.2.1.17 = STRING: "TR"
mib-2.43.7.1.1.2.1.18 = STRING: "ZH"
mib-2.43.7.1.1.2.1.19 = STRING: "ZH"
mib-2.43.7.1.1.2.1.20 = STRING: "KO"
mib-2.43.7.1.1.3.1.1 = STRING: " "
mib-2.43.7.1.1.3.1.2 = STRING: " "
mib-2.43.7.1.1.3.1.3 = STRING: " "
mib-2.43.7.1.1.3.1.4 = STRING: " "
mib-2.43.7.1.1.3.1.5 = STRING: " "
mib-2.43.7.1.1.3.1.6 = STRING: " "
mib-2.43.7.1.1.3.1.7 = STRING: " "
mib-2.43.7.1.1.3.1.8 = STRING: " "
mib-2.43.7.1.1.3.1.9 = STRING: " "
mib-2.43.7.1.1.3.1.10 = STRING: " "
mib-2.43.7.1.1.3.1.11 = STRING: " "
mib-2.43.7.1.1.3.1.12 = STRING: " "
mib-2.43.7.1.1.3.1.13 = STRING: " "
mib-2.43.7.1.1.3.1.14 = STRING: " "
mib-2.43.7.1.1.3.1.15 = STRING: " "
mib-2.43.7.1.1.3.1.16 = STRING: " "
mib-2.43.7.1.1.3.1.17 = STRING: " "
mib-2.43.7.1.1.3.1.18 = STRING: " "
mib-2.43.7.1.1.3.1.19 = STRING: " "
mib-2.43.7.1.1.3.1.20 = STRING: " "
mib-2.43.7.1.1.4.1.1 = INTEGER: 2009
mib-2.43.7.1.1.4.1.2 = INTEGER: 2009
mib-2.43.7.1.1.4.1.3 = INTEGER: 2009
mib-2.43.7.1.1.4.1.4 = INTEGER: 2009
mib-2.43.7.1.1.4.1.5 = INTEGER: 2009
mib-2.43.7.1.1.4.1.6 = INTEGER: 2009
mib-2.43.7.1.1.4.1.7 = INTEGER: 2009
mib-2.43.7.1.1.4.1.8 = INTEGER: 2009
mib-2.43.7.1.1.4.1.9 = INTEGER: 2009
mib-2.43.7.1.1.4.1.10 = INTEGER: 2009
mib-2.43.7.1.1.4.1.11 = INTEGER: 2009
mib-2.43.7.1.1.4.1.12 = INTEGER: 106
mib-2.43.7.1.1.4.1.13 = INTEGER: 8
mib-2.43.7.1.1.4.1.14 = INTEGER: 5
mib-2.43.7.1.1.4.1.15 = INTEGER: 5
mib-2.43.7.1.1.4.1.16 = INTEGER: 5
mib-2.43.7.1.1.4.1.17 = INTEGER: 12
mib-2.43.7.1.1.4.1.18 = INTEGER: 106
mib-2.43.7.1.1.4.1.19 = INTEGER: 106
mib-2.43.7.1.1.4.1.20 = INTEGER: 106
mib-2.43.8.2.1.2.1.1 = INTEGER: 3
mib-2.43.8.2.1.2.1.2 = INTEGER: 3
mib-2.43.8.2.1.2.1.3 = INTEGER: 4
mib-2.43.8.2.1.2.1.4 = INTEGER: 5
mib-2.43.8.2.1.2.1.5 = INTEGER: 5
mib-2.43.8.2.1.3.1.1 = INTEGER: 3
mib-2.43.8.2.1.3.1.2 = INTEGER: 3
mib-2.43.8.2.1.3.1.3 = INTEGER: 3
mib-2.43.8.2.1.3.1.4 = INTEGER: 3
mib-2.43.8.2.1.3.1.5 = INTEGER: 3
mib-2.43.8.2.1.4.1.1 = INTEGER: 82677
mib-2.43.8.2.1.4.1.2 = INTEGER: 165354
mib-2.43.8.2.1.4.1.3 = INTEGER: 82677
mib-2.43.8.2.1.4.1.4 = INTEGER: 82677
mib-2.43.8.2.1.4.1.5 = INTEGER: 86614
mib-2.43.8.2.1.5.1.1 = INTEGER: 116929
mib-2.43.8.2.1.5.1.2 = INTEGER: 116929
mib-2.43.8.2.1.5.1.3 = INTEGER: 116929
mib-2.43.8.2.1.5.1.4 = INTEGER: 116929
mib-2.43.8.2.1.5.1.5 = INTEGER: 43307
mib-2.43.8.2.1.6.1.1 = INTEGER: 82677
mib-2.43.8.2.1.6.1.2 = INTEGER: 165354
mib-2.43.8.2.1.6.1.3 = INTEGER: 82677
mib-2.43.8.2.1.6.1.4 = INTEGER: 82677
mib-2.43.8.2.1.6.1.5 = INTEGER: 86614
mib-2.43.8.2.1.7.1.1 = INTEGER: 116929
mib-2.43.8.2.1.7.1.2 = INTEGER: 116929
mib-2.43.8.2.1.7.1.3 = INTEGER: 116929
mib-2.43.8.2.1.7.1.4 = INTEGER: 116929
mib-2.43.8.2.1.7.1.5 = INTEGER: 43307
mib-2.43.8.2.1.8.1.1 = INTEGER: 8
mib-2.43.8.2.1.8.1.2 = INTEGER: 8
mib-2.43.8.2.1.8.1.3 = INTEGER: 8
mib-2.43.8.2.1.8.1.4 = INTEGER: 8
mib-2.43.8.2.1.8.1.5 = INTEGER: 8
mib-2.43.8.2.1.9.1.1 = INTEGER: 520
mib-2.43.8.2.1.9.1.2 = INTEGER: 520
mib-2.43.8.2.1.9.1.3 = INTEGER: 100
mib-2.43.8.2.1.9.1.4 = INTEGER: 1
mib-2.43.8.2.1.9.1.5 = INTEGER: 1
mib-2.43.8.2.1.10.1.1 = INTEGER: 520
mib-2.43.8.2.1.10.1.2 = INTEGER: 520
mib-2.43.8.2.1.10.1.3 = INTEGER: -3
mib-2.43.8.2.1.10.1.4 = INTEGER: -3
mib-2.43.8.2.1.10.1.5 = INTEGER: -3
mib-2.43.8.2.1.11.1.1 = INTEGER: 4
mib-2.43.8.2.1.11.1.2 = INTEGER: 4
mib-2.43.8.2.1.11.1.3 = INTEGER: 4
mib-2.43.8.2.1.11.1.4 = INTEGER: 4
mib-2.43.8.2.1.11.1.5 = INTEGER: 4
mib-2.43.8.2.1.12.1.1 = STRING: "iso-a4-white"
mib-2.43.8.2.1.12.1.2 = STRING: "iso-a3-white"
mib-2.43.8.2.1.12.1.3 = STRING: "iso-a4-white"
mib-2.43.8.2.1.12.1.4 = STRING: "iso-a4-white"
mib-2.43.8.2.1.12.1.5 = STRING: "iso-designated-long-envelope"
mib-2.43.8.2.1.13.1.1 = STRING: "Tray 1"
mib-2.43.8.2.1.13.1.2 = STRING: "Tray 2"
mib-2.43.8.2.1.13.1.3 = STRING: "MP Tray"
mib-2.43.8.2.1.13.1.4 = STRING: "Manual Paper"
mib-2.43.8.2.1.13.1.5 = STRING: "Manual Envelope"
mib-2.43.8.2.1.14.1.1 = STRING: "Lexmark International"
mib-2.43.8.2.1.14.1.2 = STRING: "Lexmark International"
mib-2.43.8.2.1.14.1.3 = STRING: "Lexmark International"
mib-2.43.8.2.1.14.1.4 = STRING: "Lexmark International"
mib-2.43.8.2.1.14.1.5 = STRING: "Lexmark International"
mib-2.43.8.2.1.15.1.1 = ""
mib-2.43.8.2.1.15.1.2 = ""
mib-2.43.8.2.1.15.1.3 = ""
mib-2.43.8.2.1.15.1.4 = ""
mib-2.43.8.2.1.15.1.5 = ""
mib-2.43.8.2.1.16.1.1 = ""
mib-2.43.8.2.1.16.1.2 = ""
mib-2.43.8.2.1.16.1.3 = ""
mib-2.43.8.2.1.16.1.4 = ""
mib-2.43.8.2.1.16.1.5 = ""
mib-2.43.8.2.1.17.1.1 = ""
mib-2.43.8.2.1.17.1.2 = ""
mib-2.43.8.2.1.17.1.3 = ""
mib-2.43.8.2.1.17.1.4 = ""
mib-2.43.8.2.1.17.1.5 = ""
mib-2.43.8.2.1.18.1.1 = STRING: "Tray 1"
mib-2.43.8.2.1.18.1.2 = STRING: "Tray 2"
mib-2.43.8.2.1.18.1.3 = STRING: "MP Feeder"
mib-2.43.8.2.1.18.1.4 = STRING: "Manual"
mib-2.43.8.2.1.18.1.5 = STRING: "Manual Env"
mib-2.43.8.2.1.19.1.1 = INTEGER: 5
mib-2.43.8.2.1.19.1.2 = INTEGER: 5
mib-2.43.8.2.1.19.1.3 = INTEGER: 5
mib-2.43.8.2.1.19.1.4 = INTEGER: 5
mib-2.43.8.2.1.19.1.5 = INTEGER: 5
mib-2.43.8.2.1.20.1.1 = INTEGER: -2
mib-2.43.8.2.1.20.1.2 = INTEGER: -2
mib-2.43.8.2.1.20.1.3 = INTEGER: -2
mib-2.43.8.2.1.20.1.4 = INTEGER: -2
mib-2.43.8.2.1.20.1.5 = INTEGER: -2
mib-2.43.8.2.1.21.1.1 = STRING: "stationary"
mib-2.43.8.2.1.21.1.2 = STRING: "stationary"
mib-2.43.8.2.1.21.1.3 = STRING: "stationary"
mib-2.43.8.2.1.21.1.4 = STRING: "stationary"
mib-2.43.8.2.1.21.1.5 = STRING: "envelope"
mib-2.43.8.2.1.22.1.1 = STRING: "unknown"
mib-2.43.8.2.1.22.1.2 = STRING: "unknown"
mib-2.43.8.2.1.22.1.3 = STRING: "unknown"
mib-2.43.8.2.1.22.1.4 = STRING: "unknown"
mib-2.43.8.2.1.22.1.5 = STRING: "unknown"
mib-2.43.8.2.1.23.1.1 = INTEGER: -2
mib-2.43.8.2.1.23.1.2 = INTEGER: -2
mib-2.43.8.2.1.23.1.3 = INTEGER: -2
mib-2.43.8.2.1.23.1.4 = INTEGER: -2
mib-2.43.8.2.1.23.1.5 = INTEGER: -2
mib-2.43.9.2.1.2.1.1 = INTEGER: 4
mib-2.43.9.2.1.3.1.1 = INTEGER: 8
mib-2.43.9.2.1.4.1.1 = INTEGER: 400
mib-2.43.9.2.1.5.1.1 = INTEGER: -3
mib-2.43.9.2.1.6.1.1 = INTEGER: 4
mib-2.43.9.2.1.7.1.1 = STRING: "Standard Bin"
mib-2.43.9.2.1.8.1.1 = STRING: "Lexmark International"
mib-2.43.9.2.1.9.1.1 = ""
mib-2.43.9.2.1.10.1.1 = ""
mib-2.43.9.2.1.11.1.1 = ""
mib-2.43.9.2.1.12.1.1 = STRING: "Standard Bin"
mib-2.43.9.2.1.13.1.1 = INTEGER: 5
mib-2.43.9.2.1.14.1.1 = INTEGER: 3
mib-2.43.9.2.1.15.1.1 = INTEGER: 0
mib-2.43.9.2.1.16.1.1 = INTEGER: 0
mib-2.43.9.2.1.17.1.1 = INTEGER: 0
mib-2.43.9.2.1.18.1.1 = INTEGER: 0
mib-2.43.9.2.1.19.1.1 = INTEGER: 3
mib-2.43.9.2.1.20.1.1 = INTEGER: 4
mib-2.43.9.2.1.21.1.1 = INTEGER: 5
mib-2.43.9.2.1.22.1.1 = INTEGER: 5
mib-2.43.9.2.1.23.1.1 = INTEGER: 4
mib-2.43.9.2.1.24.1.1 = INTEGER: 3
mib-2.43.10.2.1.2.1.1 = INTEGER: 4
mib-2.43.10.2.1.3.1.1 = INTEGER: 8
mib-2.43.10.2.1.4.1.1 = Counter32: 2899
mib-2.43.10.2.1.5.1.1 = Counter32: 42
mib-2.43.10.2.1.6.1.1 = INTEGER: 4
mib-2.43.10.2.1.7.1.1 = INTEGER: 0
mib-2.43.10.2.1.8.1.1 = INTEGER: 3
mib-2.43.10.2.1.9.1.1 = INTEGER: 600
mib-2.43.10.2.1.10.1.1 = INTEGER: 600
mib-2.43.10.2.1.11.1.1 = INTEGER: 1667
mib-2.43.10.2.1.12.1.1 = INTEGER: 1667
mib-2.43.10.2.1.13.1.1 = INTEGER: 1667
mib-2.43.10.2.1.14.1.1 = INTEGER: 1667
mib-2.43.10.2.1.15.1.1 = INTEGER: 4
mib-2.43.11.1.1.2.1.1 = INTEGER: 1
mib-2.43.11.1.1.2.1.2 = INTEGER: 1
mib-2.43.11.1.1.2.1.3 = INTEGER: 1
mib-2.43.11.1.1.2.1.4 = INTEGER: 1
mib-2.43.11.1.1.2.1.5 = INTEGER: 1
mib-2.43.11.1.1.2.1.6 = INTEGER: 1
mib-2.43.11.1.1.2.1.7 = INTEGER: 1
mib-2.43.11.1.1.2.1.8 = INTEGER: 1
mib-2.43.11.1.1.2.1.9 = INTEGER: 1
mib-2.43.11.1.1.2.1.10 = INTEGER: 1
mib-2.43.11.1.1.2.1.11 = INTEGER: 1
mib-2.43.11.1.1.3.1.1 = INTEGER: 1
mib-2.43.11.1.1.3.1.2 = INTEGER: 2
mib-2.43.11.1.1.3.1.3 = INTEGER: 3
mib-2.43.11.1.1.3.1.4 = INTEGER: 4
mib-2.43.11.1.1.3.1.5 = INTEGER: 5
mib-2.43.11.1.1.3.1.6 = INTEGER: 6
mib-2.43.11.1.1.3.1.7 = INTEGER: 7
mib-2.43.11.1.1.3.1.8 = INTEGER: 8
mib-2.43.11.1.1.3.1.9 = INTEGER: 9
mib-2.43.11.1.1.3.1.10 = INTEGER: 10
mib-2.43.11.1.1.3.1.11 = INTEGER: 11
mib-2.43.11.1.1.4.1.1 = INTEGER: 3
mib-2.43.11.1.1.4.1.2 = INTEGER: 3
mib-2.43.11.1.1.4.1.3 = INTEGER: 3
mib-2.43.11.1.1.4.1.4 = INTEGER: 3
mib-2.43.11.1.1.4.1.5 = INTEGER: 3
mib-2.43.11.1.1.4.1.6 = INTEGER: 3
mib-2.43.11.1.1.4.1.7 = INTEGER: 3
mib-2.43.11.1.1.4.1.8 = INTEGER: 3
mib-2.43.11.1.1.4.1.9 = INTEGER: 4
mib-2.43.11.1.1.4.1.10 = INTEGER: 3
mib-2.43.11.1.1.4.1.11 = INTEGER: 3
mib-2.43.11.1.1.5.1.1 = INTEGER: 3
mib-2.43.11.1.1.5.1.2 = INTEGER: 3
mib-2.43.11.1.1.5.1.3 = INTEGER: 3
mib-2.43.11.1.1.5.1.4 = INTEGER: 3
mib-2.43.11.1.1.5.1.5 = INTEGER: 9
mib-2.43.11.1.1.5.1.6 = INTEGER: 9
mib-2.43.11.1.1.5.1.7 = INTEGER: 9
mib-2.43.11.1.1.5.1.8 = INTEGER: 9
mib-2.43.11.1.1.5.1.9 = INTEGER: 4
mib-2.43.11.1.1.5.1.10 = INTEGER: 1
mib-2.43.11.1.1.5.1.11 = INTEGER: 1
mib-2.43.11.1.1.6.1.1 = STRING: "Cyan toner"
mib-2.43.11.1.1.6.1.2 = STRING: "Gul toner"
mib-2.43.11.1.1.6.1.3 = STRING: "Magenta toner"
mib-2.43.11.1.1.6.1.4 = STRING: "Sort toner"
mib-2.43.11.1.1.6.1.5 = STRING: "Fotoledertrommel: cyan"
mib-2.43.11.1.1.6.1.6 = STRING: "Fotoledertrommel: gul"
mib-2.43.11.1.1.6.1.7 = STRING: "Fotoledertrommel: magenta"
mib-2.43.11.1.1.6.1.8 = STRING: "Fotoledertrommel: sort"
mib-2.43.11.1.1.6.1.9 = STRING: "Toneroppsamlingsflaske"
mib-2.43.11.1.1.6.1.10 = STRING: "100.000 - vedl.h.sett"
mib-2.43.11.1.1.6.1.11 = STRING: "600.000 - vedl.h.sett"
mib-2.43.11.1.1.7.1.1 = INTEGER: 7
mib-2.43.11.1.1.7.1.2 = INTEGER: 7
mib-2.43.11.1.1.7.1.3 = INTEGER: 7
mib-2.43.11.1.1.7.1.4 = INTEGER: 7
mib-2.43.11.1.1.7.1.5 = INTEGER: 7
mib-2.43.11.1.1.7.1.6 = INTEGER: 7
mib-2.43.11.1.1.7.1.7 = INTEGER: 7
mib-2.43.11.1.1.7.1.8 = INTEGER: 7
mib-2.43.11.1.1.7.1.9 = INTEGER: 7
mib-2.43.11.1.1.7.1.10 = INTEGER: 7
mib-2.43.11.1.1.7.1.11 = INTEGER: 7
mib-2.43.11.1.1.8.1.1 = INTEGER: 12000
mib-2.43.11.1.1.8.1.2 = INTEGER: 12000
mib-2.43.11.1.1.8.1.3 = INTEGER: 12000
mib-2.43.11.1.1.8.1.4 = INTEGER: 13000
mib-2.43.11.1.1.8.1.5 = INTEGER: 47000
mib-2.43.11.1.1.8.1.6 = INTEGER: 47000
mib-2.43.11.1.1.8.1.7 = INTEGER: 47000
mib-2.43.11.1.1.8.1.8 = INTEGER: 53000
mib-2.43.11.1.1.8.1.9 = INTEGER: 30000
mib-2.43.11.1.1.8.1.10 = INTEGER: 100000
mib-2.43.11.1.1.8.1.11 = INTEGER: 600000
mib-2.43.11.1.1.9.1.1 = INTEGER: 10800
mib-2.43.11.1.1.9.1.2 = INTEGER: 12000
mib-2.43.11.1.1.9.1.3 = INTEGER: 12000
mib-2.43.11.1.1.9.1.4 = INTEGER: 11700
mib-2.43.11.1.1.9.1.5 = INTEGER: 42300
mib-2.43.11.1.1.9.1.6 = INTEGER: 42300
mib-2.43.11.1.1.9.1.7 = INTEGER: 42300
mib-2.43.11.1.1.9.1.8 = INTEGER: 47700
mib-2.43.11.1.1.9.1.9 = INTEGER: 30000
mib-2.43.11.1.1.9.1.10 = INTEGER: -3
mib-2.43.11.1.1.9.1.11 = INTEGER: -3
mib-2.43.12.1.1.2.1.1 = INTEGER: 1
mib-2.43.12.1.1.2.1.2 = INTEGER: 1
mib-2.43.12.1.1.2.1.3 = INTEGER: 1
mib-2.43.12.1.1.2.1.4 = INTEGER: 1
mib-2.43.12.1.1.3.1.1 = INTEGER: 3
mib-2.43.12.1.1.3.1.2 = INTEGER: 3
mib-2.43.12.1.1.3.1.3 = INTEGER: 3
mib-2.43.12.1.1.3.1.4 = INTEGER: 3
mib-2.43.12.1.1.4.1.1 = STRING: "cyan"
mib-2.43.12.1.1.4.1.2 = STRING: "yellow"
mib-2.43.12.1.1.4.1.3 = STRING: "magenta"
mib-2.43.12.1.1.4.1.4 = STRING: "black"
mib-2.43.12.1.1.5.1.1 = INTEGER: 2
mib-2.43.12.1.1.5.1.2 = INTEGER: 2
mib-2.43.12.1.1.5.1.3 = INTEGER: 2
mib-2.43.12.1.1.5.1.4 = INTEGER: 2
mib-2.43.13.4.1.2.1.1 = INTEGER: 3
mib-2.43.13.4.1.2.1.2 = INTEGER: 3
mib-2.43.13.4.1.3.1.1 = INTEGER: 3
mib-2.43.13.4.1.3.1.2 = INTEGER: 3
mib-2.43.13.4.1.4.1.1 = INTEGER: 288000000
mib-2.43.13.4.1.4.1.2 = INTEGER: 288000000
mib-2.43.13.4.1.5.1.1 = INTEGER: 178300
mib-2.43.13.4.1.5.1.2 = INTEGER: 165000
mib-2.43.13.4.1.6.1.1 = INTEGER: 129100
mib-2.43.13.4.1.6.1.2 = INTEGER: 116900
mib-2.43.13.4.1.7.1.1 = INTEGER: 59000
mib-2.43.13.4.1.7.1.2 = INTEGER: 72000
mib-2.43.13.4.1.8.1.1 = INTEGER: 36000
mib-2.43.13.4.1.8.1.2 = INTEGER: 36000
mib-2.43.13.4.1.9.1.1 = INTEGER: 5
mib-2.43.13.4.1.9.1.2 = INTEGER: 3
mib-2.43.13.4.1.10.1.1 = STRING: "Primary Paper Path"
mib-2.43.13.4.1.10.1.2 = STRING: "Duplex Paper Path"
mib-2.43.13.4.1.11.1.1 = INTEGER: 4
mib-2.43.13.4.1.11.1.2 = INTEGER: 4
mib-2.43.14.1.1.2.1.1 = INTEGER: 33
mib-2.43.14.1.1.2.1.2 = INTEGER: 7
mib-2.43.14.1.1.2.1.3 = INTEGER: 15
mib-2.43.14.1.1.2.1.4 = INTEGER: 10
mib-2.43.14.1.1.2.1.5 = INTEGER: 8
mib-2.43.14.1.1.2.1.6 = INTEGER: 11
mib-2.43.14.1.1.2.1.7 = INTEGER: 13
mib-2.43.14.1.1.2.1.8 = INTEGER: 14
mib-2.43.14.1.1.2.1.9 = INTEGER: 34
mib-2.43.14.1.1.3.1.1 = ""
mib-2.43.14.1.1.3.1.2 = ""
mib-2.43.14.1.1.3.1.3 = ""
mib-2.43.14.1.1.3.1.4 = ""
mib-2.43.14.1.1.3.1.5 = ""
mib-2.43.14.1.1.3.1.6 = ""
mib-2.43.14.1.1.3.1.7 = ""
mib-2.43.14.1.1.3.1.8 = ""
mib-2.43.14.1.1.3.1.9 = STRING: "USB"
mib-2.43.14.1.1.4.1.1 = INTEGER: 6
mib-2.43.14.1.1.4.1.2 = INTEGER: 6
mib-2.43.14.1.1.4.1.3 = INTEGER: 6
mib-2.43.14.1.1.4.1.4 = INTEGER: 6
mib-2.43.14.1.1.4.1.5 = INTEGER: 6
mib-2.43.14.1.1.4.1.6 = INTEGER: 6
mib-2.43.14.1.1.4.1.7 = INTEGER: 6
mib-2.43.14.1.1.4.1.8 = INTEGER: 6
mib-2.43.14.1.1.4.1.9 = INTEGER: 6
mib-2.43.14.1.1.5.1.1 = INTEGER: 2
mib-2.43.14.1.1.5.1.2 = INTEGER: 2
mib-2.43.14.1.1.5.1.3 = INTEGER: 2
mib-2.43.14.1.1.5.1.4 = INTEGER: 2
mib-2.43.14.1.1.5.1.5 = INTEGER: 2
mib-2.43.14.1.1.5.1.6 = INTEGER: 2
mib-2.43.14.1.1.5.1.7 = INTEGER: 2
mib-2.43.14.1.1.5.1.8 = INTEGER: 2
mib-2.43.14.1.1.5.1.9 = INTEGER: 2
mib-2.43.14.1.1.6.1.1 = INTEGER: 3
mib-2.43.14.1.1.6.1.2 = INTEGER: 3
mib-2.43.14.1.1.6.1.3 = INTEGER: 3
mib-2.43.14.1.1.6.1.4 = INTEGER: 3
mib-2.43.14.1.1.6.1.5 = INTEGER: 3
mib-2.43.14.1.1.6.1.6 = INTEGER: 3
mib-2.43.14.1.1.6.1.7 = INTEGER: 3
mib-2.43.14.1.1.6.1.8 = INTEGER: 3
mib-2.43.14.1.1.6.1.9 = INTEGER: 3
mib-2.43.14.1.1.7.1.1 = INTEGER: 1
mib-2.43.14.1.1.7.1.2 = INTEGER: 1
mib-2.43.14.1.1.7.1.3 = INTEGER: 1
mib-2.43.14.1.1.7.1.4 = INTEGER: 1
mib-2.43.14.1.1.7.1.5 = INTEGER: 1
mib-2.43.14.1.1.7.1.6 = INTEGER: 1
mib-2.43.14.1.1.7.1.7 = INTEGER: 1
mib-2.43.14.1.1.7.1.8 = INTEGER: 1
mib-2.43.14.1.1.7.1.9 = INTEGER: 0
mib-2.43.14.1.1.8.1.1 = INTEGER: 4
mib-2.43.14.1.1.8.1.2 = INTEGER: 4
mib-2.43.14.1.1.8.1.3 = INTEGER: 4
mib-2.43.14.1.1.8.1.4 = INTEGER: 4
mib-2.43.14.1.1.8.1.5 = INTEGER: 4
mib-2.43.14.1.1.8.1.6 = INTEGER: 4
mib-2.43.14.1.1.8.1.7 = INTEGER: 4
mib-2.43.14.1.1.8.1.8 = INTEGER: 4
mib-2.43.14.1.1.8.1.9 = INTEGER: 4
mib-2.43.15.1.1.2.1.1 = INTEGER: 3
mib-2.43.15.1.1.2.1.2 = INTEGER: 6
mib-2.43.15.1.1.2.1.3 = INTEGER: 47
mib-2.43.15.1.1.2.1.4 = INTEGER: 5
mib-2.43.15.1.1.2.1.5 = INTEGER: 37
mib-2.43.15.1.1.2.1.6 = INTEGER: 31
mib-2.43.15.1.1.3.1.1 = STRING: "5C"
mib-2.43.15.1.1.3.1.2 = STRING: "3"
mib-2.43.15.1.1.3.1.3 = STRING: "1.0"
mib-2.43.15.1.1.3.1.4 = STRING: "1.0"
mib-2.43.15.1.1.3.1.5 = STRING: "1.0"
mib-2.43.15.1.1.3.1.6 = STRING: "1.0"
mib-2.43.15.1.1.4.1.1 = STRING: "4 Plus"
mib-2.43.15.1.1.4.1.2 = STRING: "3010"
mib-2.43.15.1.1.4.1.3 = STRING: "5"
mib-2.43.15.1.1.4.1.4 = STRING: "HP PJL"
mib-2.43.15.1.1.4.1.5 = ""
mib-2.43.15.1.1.4.1.6 = ""
mib-2.43.15.1.1.5.1.1 = STRING: "Lexmark PCL"
mib-2.43.15.1.1.5.1.2 = STRING: "Lexmark PostScript"
mib-2.43.15.1.1.5.1.3 = STRING: "Lexmark XL"
mib-2.43.15.1.1.5.1.4 = STRING: "Lexmark PJL"
mib-2.43.15.1.1.5.1.5 = STRING: "Lexmark Automatic Language Switching "
mib-2.43.15.1.1.5.1.6 = STRING: "Lexmark NPAP"
mib-2.43.15.1.1.6.1.1 = ""
mib-2.43.15.1.1.6.1.2 = STRING: "010"
mib-2.43.15.1.1.6.1.3 = ""
mib-2.43.15.1.1.6.1.4 = ""
mib-2.43.15.1.1.6.1.5 = ""
mib-2.43.15.1.1.6.1.6 = ""
mib-2.43.15.1.1.7.1.1 = INTEGER: 3
mib-2.43.15.1.1.7.1.2 = INTEGER: 3
mib-2.43.15.1.1.7.1.3 = INTEGER: 3
mib-2.43.15.1.1.7.1.4 = INTEGER: 3
mib-2.43.15.1.1.7.1.5 = INTEGER: 3
mib-2.43.15.1.1.7.1.6 = INTEGER: 3
mib-2.43.15.1.1.8.1.1 = INTEGER: 600
mib-2.43.15.1.1.8.1.2 = INTEGER: 600
mib-2.43.15.1.1.8.1.3 = INTEGER: 600
mib-2.43.15.1.1.8.1.4 = INTEGER: -1
mib-2.43.15.1.1.8.1.5 = INTEGER: -1
mib-2.43.15.1.1.8.1.6 = INTEGER: -1
mib-2.43.15.1.1.9.1.1 = INTEGER: 600
mib-2.43.15.1.1.9.1.2 = INTEGER: 600
mib-2.43.15.1.1.9.1.3 = INTEGER: 600
mib-2.43.15.1.1.9.1.4 = INTEGER: -1
mib-2.43.15.1.1.9.1.5 = INTEGER: -1
mib-2.43.15.1.1.9.1.6 = INTEGER: -1
mib-2.43.15.1.1.10.1.1 = INTEGER: 2009
mib-2.43.15.1.1.10.1.2 = INTEGER: 2009
mib-2.43.15.1.1.10.1.3 = INTEGER: 2009
mib-2.43.15.1.1.10.1.4 = INTEGER: 2009
mib-2.43.15.1.1.10.1.5 = INTEGER: 2009
mib-2.43.15.1.1.10.1.6 = INTEGER: 2009
mib-2.43.15.1.1.11.1.1 = INTEGER: 2009
mib-2.43.15.1.1.11.1.2 = INTEGER: 2009
mib-2.43.15.1.1.11.1.3 = INTEGER: 2009
mib-2.43.15.1.1.11.1.4 = INTEGER: 2009
mib-2.43.15.1.1.11.1.5 = INTEGER: 2009
mib-2.43.15.1.1.11.1.6 = INTEGER: 2009
mib-2.43.15.1.1.12.1.1 = INTEGER: 3
mib-2.43.15.1.1.12.1.2 = INTEGER: 3
mib-2.43.15.1.1.12.1.3 = INTEGER: 3
mib-2.43.15.1.1.12.1.4 = INTEGER: 3
mib-2.43.15.1.1.12.1.5 = INTEGER: 4
mib-2.43.15.1.1.12.1.6 = INTEGER: 3
mib-2.43.16.5.1.2.1.1 = ""
mib-2.43.17.6.1.2.1.1 = INTEGER: 0
mib-2.43.17.6.1.3.1.1 = INTEGER: 0
mib-2.43.17.6.1.4.1.1 = INTEGER: 0
mib-2.43.17.6.1.5.1.1 = ""
ipv6Forwarding.0 = INTEGER: notForwarding(2)
ipv6DefaultHopLimit.0 = INTEGER: 64
ipv6Interfaces.0 = Gauge32: 2
ipv6IfDescr.1 = STRING: lo
ipv6IfDescr.2 = STRING: eth0
ipv6IfLowerLayer.1 = OID: zeroDotZero
ipv6IfLowerLayer.2 = OID: zeroDotZero
ipv6IfEffectiveMtu.1 = Gauge32: 16436 octets
ipv6IfEffectiveMtu.2 = Gauge32: 1500 octets
ipv6IfPhysicalAddress.1 = STRING:
ipv6IfPhysicalAddress.2 = STRING: 0:4:0:aa:67:82
ipv6IfAdminStatus.1 = INTEGER: up(1)
ipv6IfAdminStatus.2 = INTEGER: up(1)
ipv6IfOperStatus.1 = INTEGER: up(1)
ipv6IfOperStatus.2 = INTEGER: up(1)
# nmap -sUS <skanner_ip-adr>
Interesting ports on <skanner_ip-adr>:
Not shown: 1980 closed ports
PORT STATE SERVICE
21/tcp open ftp
79/tcp open finger
80/tcp open http
443/tcp open https
515/tcp open printer
631/tcp open ipp
5000/tcp open upnp
5001/tcp open commplex-link
6100/tcp open unknown
8000/tcp open http-alt
9000/tcp open unknown
9100/tcp open jetdirect
9200/tcp open unknown
9500/tcp open unknown
10000/tcp open snet-sensor-mgmt
69/udp open|filtered tftp
161/udp open|filtered snmp
5353/udp open|filtered zeroconf
6000/udp open|filtered unknown
9200/udp open|filtered unknown
MAC Address: 00:00:00:00:00:00 (Lexmark International)
Nmap done: 1 IP address (1 host up) scanned in 979.76 seconds
/usr/lexscan/bin # ./lexscan --help
lexscan
Provides an easy way to create Scan to PC profiles.
A scan profile includes all the necessary information about
your documents which is send to the MFP for easy retrieval.
The image received is an uncompresses PXM image.
USAGE:
lexscan --ip-address=<scanner_ipaddress> [-x]
lexscan [-h]
lexscan [-v]
OPTIONS:
-x Run lexscan in debug mode.
-h Display this help and exit.
-v Display version information and exit.
FEATURES:
Scanner:
--ip-address
The IP address / hostname associated with this scan job.
Profile Information:
--user-name
The user name associated with this scan job.
--profile-name
The profile name associated with this scan job.
Image Settings:
--content-type
Indicates the type of material to be scanned.
Valid values are 0,1,2. Default value is 1.
0 Text
1 Text/Graphics
2 Photo
--resolution
The resolution of the scan job in dots per inch.
Valid values are 75,150,200,300,400,600. Default value is 150.
--mode
The color depth of the scan job.
Valid values are 0,1,2. Default value is 1.
0 1-bit Black & White
1 8-bit Grayscale
2 24-bit Color
--original-size
The size of the area to be scanned.
Valid values are 0 - 16. Default value is 0.
0 Letter 14 Business Card
1 Executive 15 Book Original
2 Legal 16 Auto Size
3 A3 17 Mixed Size
4 A4 18 Universal
5 A5 19 ID Card
6 A6 20 Oficio (México)
7 B4 21 Custom Scan Size 1
8 B5 22 Custom Scan Size 2
9 Tabloid 23 Custom Scan Size 3
10 Folio 24 Custom Scan Size 4
11 Statement 25 Custom Scan Size 5
12 3X5 Photo 26 Custom Scan Size 6
13 4X6 Photo
--orientation
The orientation of the original document text.
Valid values are 0 and 1. Default value is 0.
0 Portrait
1 Landscape
--scan-both-sides
Scan both sides of the document.
Valid values are 0 and 1. Default value is 0.
0 no
1 yes
Advanced Settings:
--brightness
Adjusts the brightness setting for this scan.
Valid values are 1 - 9. Default value is 5.
--contrast
Adjusts the contrast setting used for this scan.
Valid values are 0 - 5. Default value is 0.
--bkgremoval
Increasing background removal will make more
light shades equal white. Decreasing
background removal will preserve more light
shades. Valid values are -4 to 4. Default
value is 0.
--mirrorimage
Rotates scanned image horizontally.
Valid values are 1 and 0. Default value is 0.
--colordropout
Removes the selected color on the scanned
image, then returns it in gray scale or
black and white. Valid values are 0=None,
1=Red, 2=Green, 3=Blue. Default value is 0.
--colordropoutthreshold
Works with color dropout, if color dropout
is equal to none, this option is inactive.
This will control the quality of color
dropout. Valid values are 0 to 254. Defalut
value is 128.
--negativeimage
Inverts the pixel values. Valid values are
0 and 1. Default value is 0.
Text mode:
--text-mode
Launch this program in text mode.
Valid values are 0 and 1. Default value is 0.
0 disable
1 enable
~> telnet <skanner_ip-adr> 443
Trying <skanner_ip-adr>...
Connected to <skanner_ip-adr>.
Escape character is '^]'.
Returner til Skrivebord / Multimedia
Registrerte brukere: Google [Bot]